Landscape Rake, 72"
Model OR72LR-1
Available at limited Tractor Supply Co stores in North Dakota, South Dakota, Michigan, Minnesota, Wisconsin
Find A Store
- Ideal for storm clean-up, managing gravel driveways and leveling dirt paths, the Oregon® 72" Landscape Rake efficiently collects branches, rocks and debris.
- Heavy-duty curved alloy steel tines flex as needed to follow landscape contour, allowing you to rake without digging up the ground or disturbing the topsoil. 5 angled positions ranging 0-30 degrees with forward and reverse raking.
- More tines and one-inch spacing – finer raking and more efficient clean-up
- Large, structural tine beam channel holds alloy spring steel firmly, reducing loose tines
- Durable pivot point components, increased longevity
- High-strength steel construction
- Corrosion-resistant powder coat finish
- Built for tractors up to 30 HP
- 3-point category 1 connection or category 1 quick hitch compatible
- Made in the U.S.A. with U.S. and imported parts
- Limited 1-Year Warranty
Dimensions
- 72" width
- 186 lbs.
 |
1" tine spacing |
 |
0- to 30-degree adjustment angles |
 |
Large, structural tine beam channel |
 |
Heavy pivot components |
 |
High-strength steel construction |
 |
Corrosion-resistant powder coat finish |
 |
3-point category 1 connection |
Frequently asked questions
Q: How do I determine the right landscape rake for my needs?
A: Match your tractor's 3-point category, the PTO (power takeoff) horsepower, and the width of the tractor's tires to the Rake with the same specs. Working width should be as wide or wider than the width of your tractor tires (measure outside tire to tire).
Q: What assembly is required?
A: The Landscape Rake is shipped partially assembled. Assembly will be easier if components are aligned and loosely assembled before tightening hardware.
Q: What maintenance is required on my Landscape Rake?
A: Some service and maintenance work must be done by a qualified dealership; special skills, tools, and safety procedures may be required. Consult your operator’s manual for details.
A: Match your tractor's 3-point category, the PTO (power takeoff) horsepower, and the width of the tractor's tires to the Rake with the same specs. Working width should be as wide or wider than the width of your tractor tires (measure outside tire to tire).
Q: What assembly is required?
A: The Landscape Rake is shipped partially assembled. Assembly will be easier if components are aligned and loosely assembled before tightening hardware.
Q: What maintenance is required on my Landscape Rake?
A: Some service and maintenance work must be done by a qualified dealership; special skills, tools, and safety procedures may be required. Consult your operator’s manual for details.
Q: How do I level my Landscape Rake?
A: Level the A-frame and boom with 3-point connecting links and top link. Adjusting the top link will change the fore and aft pitch of the tool.
Q: How do I adjust the angle of my Landscape Rake?
A: Remove hitch pin assembly. The rake may be set 15-degrees or 30-degrees to the left or right for forward grading.
Q: How do I replace a tine on my Landscape Rake?
A: Tines should be replaced when they cannot be reformed to their original configuration. Loosen bolts and nuts holding tine beam and tine clamp together. Remove old tine. Insert new tine and reassemble. Consult your operator's manual for details.
A: Level the A-frame and boom with 3-point connecting links and top link. Adjusting the top link will change the fore and aft pitch of the tool.
Q: How do I adjust the angle of my Landscape Rake?
A: Remove hitch pin assembly. The rake may be set 15-degrees or 30-degrees to the left or right for forward grading.
Q: How do I replace a tine on my Landscape Rake?
A: Tines should be replaced when they cannot be reformed to their original configuration. Loosen bolts and nuts holding tine beam and tine clamp together. Remove old tine. Insert new tine and reassemble. Consult your operator's manual for details.